Power Tools
Sort by
Show result
  1. Lightweight design
  2. Quick-lock vice
  3. Spindle lock

Specifications

Capacity :Cut-off Wheel Dia. : 355mm (14") 

Power Input : 2,000W(220-240V), 1,640W(110V)

No Load Speed : 3,900/min.

RM459.00
RM538.00

Specification

Continuous Rating Input 710 W
Wheel Diameter 100 mm (4")
No Load Speed (RPM) 11,000
Dimensions (L x W x H) 258 x 118 x 97 mm (10-1/8" x 4-5/8" x 3-13/16")
Net Weight 1.5 - 1.8 kg (3.3 - 4.0 lbs.)
Power Supply Cord 2.5 m (8.2 ft)

Standard Equipment
Depressed Center Wheel (A-80852), Side Grip, Wheel Cover, Lock Nut Wrench

RM199.00
RM238.00

SPECIFICATION:

Grinder wheel: 100mm

Rated input power: 850W

No Load Speed: 11,000rpm

RM99.00
RM128.00

Power input 500 watts

No load stroke rate 1,000 – 3,200 spm

Mitre cutting angle to 45⁰

Stroke 19mm

Pendulum settings 4 stages

Max. Cutting depth in wood/ steel / aluminum 70 / 5  / 10 mm

RM188.00
RM388.00

• Powerful 2100watt motor
• Epoxy-coated field windings and armature-prevents accumulation of abrasive dust, increasing tool life
• High quality sealed bearings provide superior protection
• New "snap-in" safety guard for keyless adjustment
• Convenient three-finger switch

RM366.00
RM565.00
  • Rated input power: 980 W
  • Impact energy per stroke: 3.0J
  • In Concrete: 26mm
  • In Steel: 13mm
  • In Wood: 30mm
  • No-load speed : 0-900r/min
  • Voltage: 220V
  • Rated frequency : 50-60Hz
RM258.00
  • Best drilling speed in class due to optimized gear housing set
  • Enhanced durability and hard work due to powerful 790W motor
  • Spare parts interchangeability and easy maintenance because of smart design
  • Increased robustness for a longer lifetime due to powerful 790W motor
  • Easy and cost-effective maintenance due to spare parts interchangeability
  • Greater versatility due to 3 modes of chiselling, drilling and hammer drilling.
RM699.00

- Heavy Duty
- Speed Selection
- Rotation Control Clutch
- SDS Plus
- Variable Speed
- Forward / Reverse Rotation

RM799.00
RM888.00

- Rated power input 720W
- Drilling in concrete up to 22mm
- Optimal power transmission for small hammers
- Combi hammer with chisel function. No rotary motion, only impact effect.

RM428.00
RM480.00
  • Compactness: Shortest body length for easy and continuous handling
  • Ergonomics: Light weight tool with comfortable inline grip, makes user’s work less tedious on the job site
  • 3 Durability: Bosch quality and durability at attractive prices for price-sensitive tradesmen
RM178.00
RM218.00

Technical Data 

Part Number 0 601 B37 3L0
Model GCO 220
Cutting capacity at rectangle 0º 100MM x 196MM
Cutting capacity at square 0º 119MM x 119MM
Cutting capacity at L-profile 0º 130MM x 130MM
Cutting capacity at rectangle 45º mitre 107MM x 115MM
Cutting capacity at square 45º mitre 110MM x 110MM
Cutting capacity at L-profile 45º mitre 115MM x 115MM
Tool dimensions  256MM (W) x 520MM (L) x 400MM (H) 
No-load speed 3,800 rpm
Cutting disc diameter 355MM
Cutting disc bore 25.4MM
Weight 15KG
Rated input power 2,200W
Vibration emission value ah 2.5 m/s²
Uncertainty K 1.5 m/s²
Warranty 6 Months
RM518.00
RM668.00

The A-rated noise level of the power tool is typically as follows:

Sound pressure level dB(A); Sound power level dB(A). Uncertainty K= dB.

RM438.00
RM488.00
  • Rated power input 1,100 W
  • No-load speed 5200 rpm
  • Weight without cable 3.6 kg
  • Saw blade bore 20 mm
  • Saw blade diameter 184 mm
RM338.00
RM428.00
  • Compactness and power redefined in this class
  • Robust and powerful 500 W motor
  • Extremely compact for working in tight spaces and overhead
  • Low weight of only 1.5 kg for fatigue-free working
RM248.00
RM288.00
  • Forward/reverse rotation.
  • Electronic control for exact pilot drilling.
  • Rotating brush plate for constant power in reverse and forward rotation.
  • Higher dynamic load rated ball bearing for long life.
  • Ergonomic handle for comfortable use.
RM268.00
RM310.00

Max. drilling diameter in steel: 10 mm

Max. drilling diameter in masonry: 8 mm

Max. screw diameter: 7 mm

  • Torque (soft/hard/max): 14/30/- Nm

  • No-load speed (1st gear / 2nd gear): 0 – 400 / 0 – 1500 rpm

  • Max. impact rate: 22,500 bpm

  • Chuck capacity, min./max.: 0,3 - 10 mm

  • Battery voltage: 12 V

  • Torque settings: 20

  • Charg. time at bat. cap. 1.5 Ah (80%/100%) approx: 50/65 mins

  • Length: 185 mm

  • Height: 190 mm

  • Max. drilling diameter in wood: 20 mm

Bit holder: 3 jaw chuck

RM399.00
RM468.00

- Continuously variable speed control

- Right-hand/left-hand rotation

- Electronic

- Softgrip ​

RM399.00
  • Robust and powerful 750W motor for tough applications
  • Soft in line grip for a secure hold
  • Higher dynamic load rated ball bearing for long life
  • Rotating brush plate for constant power in reverse and forward rotation
  • Auxiliary handle with depth stop for better control
RM399.00
RM448.00

Specifications:

- Voltage (V): 18

- Torque (soft/hard): 21/54

- No-load speed (1st gear / 2nd gear): 0 – 500 / 0 – 1,900rpm

- Battery type: Lithium-ion

- Max. impact rate: 27,000bpm

- Chuck capacity, min./max.: 1.5 / 13mm

- Torque settings: 20+2 - Tool holder: Three-jaw chuck

- Dimensions (Length x Width x Height): 210 x 62 x 225 mm

- Weight: 1.6kg

- Warranty Period: 6 months

Drilling data:

- Max. drilling diameter in wood: 35mm

- Max. drilling diameter in steel: 10mm

- Max. drilling diameter in masonry: 10mm

Screwing data: 

- Max. drilling diameter in wood: 35mm

- Max. drilling diameter in steel: 10mm

- Max. drilling diameter in masonry: 10mm

- Max. screw diameter: 10mm

RM708.00
  • Rated input power* : 550 W
  • Weight : 1.8 kg
  • No-load speed : 0 – 2,800 rpm
  • Power output : 270 W
  • Rated torque : 1.5 Nm
  • Drill spindle connecting thread : 43 Chuck capacity, min./max. : 1.5 – 13 mm
  • Tool dimensions (width) : 65.5 mm
  • Tool dimensions (length) : 262 mm
  • Tool dimensions (height) : 253 mm
  • Impact rate at no-load speed : 0 – 41,800 bpm
RM268.00
RM338.00